Can You Wash Roomba Filter?



Can You Wash Roomba Filter?

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Yes, you can wash Roomba filters. However, according to iRobot, Roomba filters should not be washed as any liquid that comes in contact with it could damage the Roomba. Instead of washing, you can use pressure for a deep clean.

Approved cleaning methods include tapping the filter against your trash can or blowing it with an air compressor from a safe distance. Some sources state it’s okay to wash a Roomba filter—but only with water. And you must wait until the filter is completely dry before using it again.

To start, it’s important to know that there are different types of Roomba filters, each with varying levels of maintenance required. Some filters can be washed, while others need to be replaced. Knowing which filters can be washed is essential in order to avoid damaging your Roomba.

Additionally, there are proper techniques to follow when washing your Roomba filter, and common mistakes to avoid. By following these guidelines, you can maintain your Roomba filter and extend the life of your device.

So, let’s dive into the details and learn how to wash your Roomba filter effectively.

Types of Roomba Filters

When it comes to Roomba filters, there are a few different types to choose from. The most common types are the AeroVac filter and the HEPA filter.

The AeroVac filter is a basic filter that is designed to capture dirt and dust from your floors. It is made of a simple mesh material and is easy to clean.

The HEPA filter, on the other hand, is a more advanced type of filter. It is designed to capture smaller particles, including pet dander and allergens, making it a great option for households with pets or allergy sufferers.

Both types of Roomba filters can be washed, but it is important to note that the HEPA filter should be washed less frequently than the AeroVac filter.

When washing Roomba filters, it is important to follow the manufacturer’s instructions. Generally, you can wash the filter with warm water and mild soap, then allow it to air dry completely before reinserting it into your Roomba.

By washing your Roomba filter regularly, you can help to ensure that your Roomba is working at its best and that your floors are as clean as possible.

Which Filters Can Be Washed?

The filters that can be cleaned by washing are the Roomba AeroVac filter, Roomba AeroVac bin, and the Roomba high-efficiency filter. These filters can be washed with water and mild soap, and then left to air dry completely before reinserting them back into the Roomba. Cleaning these filters regularly can greatly improve the Roomba’s cleaning performance and prolong the life of the filters.

Here are some important things to keep in mind when washing your Roomba filters:

  • Always remove the filters from the Roomba before washing them.
  • Don’t use hot water or harsh chemicals to clean the filters.
  • Gently scrub the filters with mild soap and water.
  • Allow the filters to air dry completely before reinserting them into the Roomba.
  • It’s recommended to clean the filters every 2-3 months, depending on usage.

Proper Techniques for Washing Roomba Filters

Make sure to follow these techniques for washing your Roomba’s filters to ensure their longevity and optimal performance.

First, remove the filter from the Roomba and tap it against a garbage can to remove any loose dirt and debris.

Next, run the filter under cool water until the water runs clear. Don’t use hot water as it can damage the filter’s material.

After rinsing, gently squeeze out any excess water and let the filter air dry completely before placing it back into the Roomba. Don’t use a hairdryer or any other heat source to dry the filter as it can warp or shrink the material.

Following these simple steps will help keep your Roomba running smoothly and efficiently.

Common Mistakes to Avoid

Be careful not to damage your Roomba’s filters by avoiding these common mistakes. Firstly, avoid using hot water to wash the filters as it can cause the filter to shrink and damage the integrity of the filter. Instead, use cool or lukewarm water to gently clean the filter.

Secondly, avoid using harsh detergents or chemicals as they can strip the filter of its essential oils and damage the filter’s ability to trap dust and debris. Instead, use a mild soap or detergent that’s safe for the filter.

Thirdly, don’t wring or twist the filter as it can cause damage to the filter’s pleats and decrease its effectiveness. Instead, gently squeeze the excess water out of the filter and allow it to air dry.

Fourthly, don’t put the filter in the dryer or use high heat to dry it as it can cause the filter to shrink or melt. Instead, place the filter in a well-ventilated area to dry naturally.

By avoiding these common mistakes, you can ensure that your Roomba’s filters remain in optimal condition to effectively clean your home.

Maintaining Your Roomba Filter for Optimal Performance

Maintaining your Roomba’s filter is essential for it to work at its best, so let’s explore some tips to keep it in top shape! Firstly, make sure to clean the filter regularly, ideally after every use. This will prevent dirt and debris from building up and clogging the filter, which can reduce its suction power and overall performance.

To clean the filter, simply remove it from the Roomba and tap it gently to remove any loose dirt and dust. You can also use a soft brush or a damp cloth to wipe away any stubborn debris. If the filter is particularly dirty, you may need to wash it.

Yes, you can wash Roomba filter, but make sure to follow the manufacturer’s instructions carefully. Some filters can be washed with soap and water, while others require a specific cleaning solution. Once you’ve washed the filter, make sure to let it dry completely before reinstalling it in the Roomba. Failure to do so could damage the filter or even the Roomba itself.

By following these simple tips, you can maintain your Roomba filter for optimal performance and keep your floors looking spotless every time!


So, can you wash your Roomba filter? The answer is yes, but it depends on the type of filter you have.

HEPA filters shouldn’t be washed, while other types such as the AeroVac filter can be rinsed and reused.

When washing your Roomba filter, it’s important to follow proper techniques to avoid damaging it. This includes using cool water, gentle soap, and allowing the filter to fully dry before using it again.

By maintaining your Roomba filter, you can ensure optimal performance and prolong the life of your Roomba.

So, go ahead and give your Roomba filter a good cleaning – your floors will thank you!

We deserve a share, right?

Hi there!

I hope you’re having fun reading this article! I appreciate your feedback and would love to hear your ideas about how to make it better. If you have any ideas, you can send an email to with the URL of the article.

Thank you for taking the time to give me feedback on my writing. We really value your suggestions!

Fact Checked By Wash Theory Team

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Related Posts